Open Service Tools via Remote Access (RA)

1. Start Remote Access
2. Choose Danfoss 720
3. Launce Selected line
   • 
   • You will then get the IP address that is entered in a new connection in the Service Tools program on your Computer (Download and install "Service Tools")

4. Once you have Service Tools opened, you make a new connection. Press "Add".

The following marked lines must be completed / changed:  

Site name: «Name your Connection”

Destination name: "default"

Pass code: "123"

Channel: Change to TCP/IP

IP-address: created by Remote Access

TCP/IP port: 1041

The only thing left is to press "OK" and "Connect" on the newly created connection